4-1/2 Zoll T29 Fächerschleifscheiben für Edelstahl, Blech, Körnungen 40/60/80/120
Stop overpaying for consumables. Even at Harbor Freight, flap discs can run you $5 a piece—but EZARC's? Less than $1.7, and they perform just as well. Tough zirconia with a fiberglass backing means fast, clean grinding on metal, welds, and rust. Give it a try—save your hard-earned cash.
EZARC betreibt über 20 Lager weltweit, und Ihre Bestellung wird vom nächstgelegenen Lager versandt.
Aufgrund der Verfügbarkeit des Lagerbestands können einige Bestellungen von einem anderen Lager als ursprünglich geplant ausgeführt werden. In solchen Fällen können die Lieferzeiten das geschätzte Lieferfenster überschreiten.
Seien Sie versichert, wir legen Wert auf die schnellstmögliche Abwicklung und halten Sie während des gesamten Prozesses auf dem Laufenden.
Garantie
Innerhalb von 30 Tagen nach Lieferung des Produkts bieten wir eine Rückerstattung oder einen Produktersatz an, wenn Sie eines der folgenden Probleme feststellen:
Produkt beschädigt angekommen
Falsches Produkt erhalten
Qualitätsprobleme während der Nutzung
Kontaktieren Sie uns unter support@ezarctools.com
Wir melden uns innerhalb von 3 Werktagen bei Ihnen.
bitte lesen Sie unsere vollständigen FAQs hier. Wenn Sie noch Fragen haben, kontaktieren Sie uns bitte hier :)
Beschreibung
Große Leistung
EZARC Fächerschleifscheiben bestehen aus hartem Zirkonoxidmaterial, das länger hält als herkömmliches Aluminiumoxid-Schleifmaterial und für eine robustere und wirtschaftlichere Schleifscheibe ausgelegt ist.
Schnelles und effizientes Schleifen
Glasfaser und Klebstoff bilden eine feste Verbindung und verunreinigen die Arbeitsfläche nicht. Das Glasfaserpad kann Vibrationen effektiv absorbieren und ein stabileres und effizienteres Schleifen ermöglichen.
Bequem zu bedienen
Das abgeschrägte Typ-29-Winkeldesign macht das Kanten- und Eckenschleifen viel bequemer, hervorragend geeignet für das Oberflächenschleifen und das Arbeiten an Schweißnähten in einem Arbeitswinkel von 5 bis 15°.
Professionelle Schleiffächerscheibe
4-1/2-Zoll-Durchmesser mit einer 7/8-Zoll-Bohrungsgröße, kompatibel mit einem Winkelschleifer mit einer maximalen Schleifgeschwindigkeit von 13.300 U/min. Diese Winkelschleifer-Fächerscheibe ist zum Schleifen, Verblenden, Schleifen und Finishen einer Vielzahl von Materialien konzipiert.
Try it today—if it’s not right, return it free within 30 days.
Free Shipping Over $25
Economical Flat Rate Shipping for orders under $25 worldwide.
Warranty up to 24 Months
We’ve got you covered—enjoy peace of mind for up to 24 months
Trusted by pros Who Know Best
Reliable quality is our attitude towards consumers
@Project Farm
EZARC is your best choice when considering cutting speed and cost performance, maybe there is no better one than it. I recommend it to everyone.
@Mechanically
I'm a contractor and I have tried about every blade out there and these seem to be top shelf. Im not gonna say they are the best but i will definitely be purchasing more.
@medomechanic
Oh, let me tell you about the incredible Diamond Cutting Wheel! This tool defies all expectations and cuts through metal like a hot knife through butter, that’s simply out of this world!
@soyflaco0
This countersink set is a must have in your tool box. It is important if you're a stickler for finishing jobs and want everything to look amazing and beautiful. It is very durable and will last after job.
@brc_framers
This disk is immortal. I've cut so many things its hard to understand how the disk even exists anymore, let alone still cuts things... I will encourage others to buy them.
4.8/ 5.0
Dieses Produkt wurde mit 4.8 von 5.0 Sternen bewertet. Es hat 248 Bewertungen erhalten.
Customer Reviews
Overall rating: 4.8 / 5 from 248 reviews.
I’ll be honest I really wasn’t hoping too much or expecting much out of these and they ended amazing. I am a business owner and a journeyman Millwright.
I know good tools, I abuse tools I break them.
These wheels are amazing and I won’t even say for the money they are good. I will tell you they are better than the stuff they’re selling at the store.
You have to buy in bulk so you have to buy Once and cry once but at the end of the day, you won’t be sad when you have a drawer full. 💯 I 100% endorse this brand. These are great wheels.
Store owner replied:
That’s the kind of feedback we’re proud to hear！
These flap discs still dig hard even when the competitors discs are ready for the trash can. If you’re on the fence because of the great deal from EZ Arc, don’t be. Get you some and never look back, you won’t be sorry.
I thought these flap wheels weren't going to last like many other brands I've used, but I was wrong. These babies last much longer than many other brands. Others in the first grinds throw out most of their sand when they contact the end of the material; these took the beat much better. I bought the big pack for myself, but ended sharing with some guys to finish the job faster.
Excellent quality. Ground around 75-80 ornaments on a single flap disk. Best wheel ever used. The material is 304. Stainless steel. These ornaments are to be given away in December to pediatric patients. The sparkle in the children's eyes and the smile on their faces is Priceless. Shared this product with other metal workers with very positive feedback.
Store owner replied:
Thank you so much for the wonderful feedback! Thank you also for sharing it with fellow workers!
I’ve used these sanding discs on many projects they don’t disappoint a good value for what you get over other name brands that cost 5 times as much
Thank you for keeping me in my hobby’s and work
Store owner replied:
Love hearing this! Enjoy your tool time!
For cheapo Facebook flap disks I was really surprised. They hold up really well and actually showed up. Didn’t have to contact the fraud department at my bank
Store owner replied:
Wow! They look awesome, thanks for the feedback!
These 80 Grit discs are a great value as I got these to the grind off the rust and peeling paint from my iron fencing. It's been years and we've neglected the fence, through rain and extreme heat, the rust was building up and over and paint was starting to chip off. Finally, I had enough, it would be a big task and would take lots of sanding over the weekend, but this set of 12 discs was fit for the job. It's great value considering how many we went through for this job. It does a fine job and it's definitely worth it. They are compatible with my Milwaukee. They work great and last a while. Highly recommend.
These don't last as long as the expensive ones, but they smoke the cheaper Harbor Freight ones. And at $2 a disc, you just can't beat it. The cheapest Harbor Freight ones cost twice as much. This is a no brainer. A roll of these 40 grit discs will eat through a ton of metal and last a good long while.
Nice and thick flap discs that can be fairly aggressive with heavier touch and can also give a decent finish with a lighter pressure. The disc seen in the photo was only used to clean up and prep the piece of metal in the photo and you can see the edges of the disc have started to fray and some of the grit is completely worn off. This is expected to a degree on any disc but discs don't always fray. The disc still had life left in it. While it's not the best disc I've ever used, I was still pretty happy with the performance. I did notice a lot of disc material flying off when I was more aggressive on the edges. In the end, I think the performance of the disc is highly dependent on what type of finish you're trying to achieve and if you are just cleaning off a flat surface or grinding 45 degree angles and prepping for welds.
I was cleaning up some welds with my angle grinder, and was spending more time grinding than welding. (Im not a very good welder). Got a pack of these , and couldnt be happier. I have saved enough on disks that maybe I can take a welding class now :-)
I've never been much into the flapper wheel's, but I figured I would give them a try ... Because they are so inexpensive. I've used a few and am surprised that they hold up as good as they do! Will definitely find more uses for them in the shop in the future... Thanks for the opportunity to give them a try.
Restoring old tractor implements lately. These wheels are holding up better than the ones I got at the local hardware store. They were very inexpensive and I didn’t know if they would last but figured the price was worth the risk. Far surpassed my expectations. Holding up well cleaning rusty plow blades and making my ugly welds look halfway decent.
Took a little longer than expected to arrive.
They don’t last as longer as others I’ve tried, but they last long enough for the money. May consider buying more in the future.
I was skeptical but figured what the hay, I've wasted that much money plenty of times before. These discs came so fast the box was smokin. I'll definitely order from them again.
Oszillierende Multifunktionswerkzeug-Sägeblätter
Säbelsägeblätter
Schneiden & Schleifen
Lochsäge
Bohren
Schleifen & Polieren
Steckschlüssel- und Knarrensatz
Handwerkzeuge
Metallbauer & Fertigung
Holzbearbeitung & Zimmerei
Elektro- & Sanitärinstallationen
Automobil
Beton & Mauerwerk
Abriss
NEUHEITEN
