Verfügbarkeit für Abholungen konnte nicht geladen werden
Free Returns Within 30 Days
Free Shipping Over $25
Warranty up to 24 Months
Beschreibung
Detail:
Universell einsetzbar
Die EZARC Diamanttrennscheibe bietet exzellente Leistung und Effizienz beim Trennen von Mauerwerksmaterialien wie Granit, Marmor, Beton und Ziegel. Egal, ob Sie ein professioneller Bauunternehmer oder ein Heimwerker sind, die Turbo-Diamanttrennscheibe ist das perfekte Werkzeug für all Ihre Trennanforderungen.
Turbo-Segmente
Das Herzstück dieses Scheibendesigns sind die speziell entwickelten Turbo-Segmente, die harmonisch zusammenwirken, um jedes Mal einen glatten und sauberen Schnitt zu erzielen. Diese Segmente sind strategisch positioniert, um maximale Kühlung zu ermöglichen, Überhitzung zu verhindern und die Lebensdauer der Diamanttrennscheibe zu verlängern.
Lange Lebensdauer
Dank hochwertiger Diamantkörnung mit einer Härte von HRC90+ und einer speziellen dimensionalen Anordnung hat unsere Schleifscheibe für Mauerwerk eine maximale Schnittdauer. Diese Beton-Trennscheibe für Winkelschleifer garantiert eine wesentlich längere Lebensdauer bei anspruchsvollen Schneidarbeiten.
Passende Werkzeuge
Die EZARC 4,5-Zoll-Diamanttrennscheibe ist für die meisten handgeführten Winkelschleifer mit 7/8"-5/8" Spindelaufnahme geeignet. Scheibengröße: 4,5 Zoll; Segmenthöhe: 10 mm; Segmentdicke: 2 mm; Maximale Drehzahl: 13.300 U/min.
Zuverlässige Sicherheit
Diese 4,5-Zoll-Diamanttrennscheibe für Winkelschleifer wird aus hochfestem legiertem Stahl und einer hochwertigen Diamantmatrix hergestellt, die ein funkenfreies Schneiden ohne Brandspuren auf harten Materialien gewährleistet. Universell einsetzbar für Trocken- oder Nassschnitte.
Versand & Rücksendung
Kostenloser Versand ab 25 $.
Bestellungen unter 25 $ kosten 3,75 $ Versand.
Bestellungen werden innerhalb von 1–3 Werktagen bearbeitet und vom nächstgelegenen verfügbaren EZARC-Lager versandt.
Voraussichtliche Lieferzeit:
USA & Kanada 3–7 Tage
Vereinigtes Königreich, Deutschland & Frankreich 5–8 Tage
Australien 7–10 Tage
Andere Regionen 10–25 Tage.
Nach dem Versand erhalten Sie eine Sendungsverfolgungsnummer per E-Mail. Lokale Lagerengpässe können die Lieferzeit um etwa 3–5 Tage verlängern.
Rücksendungen & Rückerstattungen
Bitte kontaktieren Sie uns innerhalb von 30 Tagen nach Lieferung bei beschädigten, fehlerhaften oder mangelhaften Artikeln. Genehmigte Rückerstattungen werden auf Ihre ursprüngliche Zahlungsmethode zurückerstattet. Bei anderen rückgabeberechtigten Artikeln sind die Rücksendekosten und die ursprünglichen Versandkosten möglicherweise nicht erstattungsfähig.
Weitere Details finden Sie in unseren vollständigen Versandrichtlinien und Rückerstattungsrichtlinien.
Garantie & FAQ
Wenn Sie innerhalb von 30 Tagen nach Lieferung des Produkts eines der folgenden Probleme feststellen, bieten wir Ihnen eine Rückerstattung oder einen Produktumtausch an:
Produkt kam beschädigt an
Falsches Produkt erhalten
Qualitätsprobleme während des Gebrauchs
Kontaktieren Sie uns unter support@ezarctools.com
Wir werden uns innerhalb von 3 Werktagen bei Ihnen melden.
4.5/5/7 Zoll Turbo-Diamanttrennscheibe zum schnellen Schneiden von Porzellan, Granit, Marmor, Ziegel
Normaler Preis$22.95
Normaler Preis$22.95
Verkaufspreis
Grundpreis/ pro
SPARE
Liquid error (snippets/price line 129): Computation results in '-Infinity'%
Ausverkauft
EZARC ist Ihre beste Wahl, wenn Sie Schnitthöchstgeschwindigkeit und Preis-Leistung berücksichtigen – vielleicht gibt es nichts Besseres. Ich empfehle es jedem.
@projectfrom
Ich habe so ziemlich jede Klinge ausprobiert, die es gibt, und diese scheinen zur Spitzenklasse zu gehören. Ich werde nicht sagen, dass sie die besten sind, aber ich werde definitiv mehr davon kaufen.
@Mechanically
Oh, ich muss Ihnen von dem unglaublichen Diamantschneidrad erzählen! Dieses Werkzeug übertrifft alle Erwartungen und schneidet durch Metall wie ein heißes Messer durch Butter.
@soyflaco
Tolle Produkte. Diese Scheibe ist unzerstörbar. Ich habe damit so viele Dinge geschnitten, dass es schwer zu begreifen ist, wie die Scheibe überhaupt noch existiert, geschweige denn, dass sie immer noch schneidet.
@brc_framers
Customer Reviews
Overall rating: 4.9 / 5 from 20 reviews.
The EZARC Turbo diamond blade is a workhorse for rapid smooth cutting of rough stone , cast concrete pavers or brick. It is sold as an angle grinder blade, but I get more mileage out of these in a wet saw than running them dry. You can also use these to cut tile, if you don't mind the blade gobbling up to an eighth of an inch of material on the edge. Just stay on the right side of your cut line and this blade will cut tile very quickly. They really excel on stone- I have used them on slate pavers, and on the wet saw to slice random sandstone into flat faced pieces. Best of all, you get two of these blades, because even with a quality diamond blade, they do wear out, usually at an inconvenient time.
To say this blade is sharp is just touching on how sharp it is. I'm still using the first one and this thing cuts through any type of hard surface like melted butter. I used this blade to replace an old one that broke in the middle of cutting some concrete bricks for my backyard. The moment I started cutting, I had to back off of the pressure because this thing was just cutting like nothing. Hardly any pressure was needed to get through the 3 inches of concrete that I was cutting. This fits onto my angle grinder with no problems, which is great because my last one almost severed a finger in order to just get the thing on. I was able to do roughly 15ft of concrete bricks and this thing is still sharp as ever. Like that it does come in a 2 pack but for now, I still have the first one on there.
I think that the difference in these stone/masonry cutting blades and what I used in the past is that these cutinch through the material rather than just grindinch it away. A fringe benefit of this cuttinginch process is that it can be done much faster and with much less dust than in my prior experience.
I was very pleased with my first use of one of these diamond blades. I was cutting across a souvenir granite core sample (from a quarry in Winston Salem, NC) which I wanted to square off its ragged ends and polish to a high gloss finish as a paper weight. The two ends that I cut using this blade were so smooth that they appeared as if I had already begun the polishing process!
The only regret is that I did not buy bigger ones!
These blades cut into a Quartz Boulder with not one problem! awesome for dry cutting have not tried wet. I would definitely buy these again only bigger!!!!! Very impressive cutting!!! If you have not tried these you should. Decent price also!!!!!
These 5inch Turbo Diamond Saw Blades were used on a cordless Makita paddle grinder to cut a piece of marble down to the small size I needed for a project. The turbo blade cut cleanly and efficiently. Much better than my last blade ever did. I also used it on some bricks on my side yard and cutting through those was a breeze. And since it is a two-pack I have a spare for when this one finally wears down. Heavy duty blade that I would get again.
This will chew away at your material pretty quickly.... if you know your angle grinder this will get the job done nice and fast. Pretty straightforward. Good item.
I used these blades to cut bricks I was laying for a walkway. Powered right through them all day long. And you get TWO! Great blades. I will buy again.
EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder is heavy duty. This is an excellent product. It is well made and very durable. Excellent for stone cuttings.
I do a lot of tile work as a remodeling contractor so I use these blades quite a bit. I just got sick of paying the box store prices. I got these as a Vine sample to give them a try. They cut just as well as the Dewalt blades I was buying. Not sure how long they last yet but for the price point these are a great deal even if they last half as long.
I will be switching to these
These blades are good quality and are much cheaper than the DeWalt blades I have been using.
They have more teeth (if you can call them that) than the DeWalt blades and they work well for cutting through 1inch thick stucco, which is what I use them for.
These fit on the DeWalt 20v Max angle grinder without using any of the adapters. There are two adapters included in case you need them for other brands of grinders.
Pros:
All Around Stone Cutting Blade
Turbo Design
Diamond Grit
Widely Compatible
High Strength Alloy Steel
Premium Diamond Matrix
Spark Free Cutting
No Burn Marks
Cons:
None
What I received in the package:
2 x EZARC 4 1/2inch Diamond Blades
This EZARC 4 1/2inch Diamond Blade product I ordered because I just got a new Bosch Angle Grinder but it didn't come with a blade. So I wanted to test it and these looked like decent all around blade for stone work.
I honestly was not expecting much from an off brand no name blade. But this blade was surprisingly easy to use. It worked through the material I was cutting like a hot knife through butter. I used it for about 30 minutes making my cuts and continuing the work at hand and it performed just as well. On inspection of the blade it showed the normal abrasions and scuffs but not signs of actual wear or deformation of the cutting wheel.
I appreciate you taking the time to read this. All in all, I have been pleasantly surprised with the performance of this blade. You could pay a lot more for a good blade. Hope this information was helpful. [4 Stars]