This blade is built to rip clean lines—fast.
The ultra-thin 1.5 mm kerf slides with less drag, the non-stick coating keeps resin from gumming up, and the 2-pack makes it a no-brainer value.
EZARC operates over 20 warehouses worldwide, and your order will be shipped from the nearest one.
Due to inventory availability, some orders may be fulfilled from a different warehouse than originally planned. In such cases, shipping times may exceed the estimated delivery window.
Rest assured, we prioritize the fastest possible fulfillment and will keep you informed throughout the process.
Warranty
Within 30 days of product delivery, if you encounter any of the following issues, we will offer a refund or product replacement:
please check our full faq here. if you still have questions, please contact us here:)
Description
24T – Framing & Fast Rip Cuts
Material Compatibility: Softwood, Plywood, MDF, OSB & Laminated Wood
Cutting Performance: Fewer teeth for faster, aggressive cuts. Ideal for rough cutting, ripping, and framing applications.
40T – General Purpose & Clean Crosscuts
Material Compatibility: Hardwood, Plywood, MDF, OSB & Laminated Wood
Cutting Performance: Balanced tooth count for both speed and clean edges. Perfect for smooth crosscuts in both hardwood and softwood.
60T – Ultra-Fine Finish & Trim Work
Material Compatibility: Laminate, MDF, Fine Trim & Laminated Wood
Cutting Performance: Higher tooth count for ultra-smooth finishes. Best for fine woodworking, cabinetry, moldings, and trim where precision and clean edges are critical.
Non-Stick Coating – Up to 10X Longer Life
Premium heat-resistant, anti-corrosion non-stick coating reduces friction and pitch build-up, ensuring smooth cuts and extending blade life by up to 10 times.
Precisely laser-cut slots minimize vibration and noise during cutting, delivering stable performance and improved user comfort.
Durability
TiCo High-Density Tungsten Carbide Teeth with ATB Tooth Design, 15° Front & 12° Back Angles, 5/8 Inch Arbor: Equipped with high-density TiCo carbide teeth featuring an ATB (Alternate Top Bevel) design, optimized angles, and standard 5/8" arbor for enhanced sharpness, chip resistance, and compatibility.
Try it today—if it’s not right, return it free within 30 days.
Free Shipping Over $25
Economical Flat Rate Shipping for orders under $25 worldwide.
Warranty up to 24 Months
We’ve got you covered—enjoy peace of mind for up to 24 months
Trusted by pros Who Know Best
Reliable quality is our attitude towards consumers
@Project Farm
EZARC is your best choice when considering cutting speed and cost performance, maybe there is no better one than it. I recommend it to everyone.
@Mechanically
I'm a contractor and I have tried about every blade out there and these seem to be top shelf. Im not gonna say they are the best but i will definitely be purchasing more.
@medomechanic
Oh, let me tell you about the incredible Diamond Cutting Wheel! This tool defies all expectations and cuts through metal like a hot knife through butter, that’s simply out of this world!
@soyflaco0
This countersink set is a must have in your tool box. It is important if you're a stickler for finishing jobs and want everything to look amazing and beautiful. It is very durable and will last after job.
@brc_framers
This disk is immortal. I've cut so many things its hard to understand how the disk even exists anymore, let alone still cuts things... I will encourage others to buy them.
4.9/ 5.0
This product is rated 4.9 of 5.0 stars. It has received 35 reviews.
Customer Reviews
Overall rating: 4.9 / 5 from 35 reviews.
Very good materials and engineering standards. I tore a couple of the carbide the teeth off of one old thicker blade when I had to cut some fiber cement siding. These of course are just for 2x2s to 2x12's wood, plywood, and PVC type artificial lumber/trim which I have used a few times. These blades cut through some 1/2'' plywood like a hot knife through butter with my old SKIL saw. I like the thinner profile since it takes less energy for my circular saw to cut the material and it creates less waste, thinner cuts.
I got these 60T ultra fine blades because I wanted a blade that was able to do a fine cut and without a lot of tearout, and they were fit for the task.
I was really impressed with the quality of these EZARC blades. I can already see that this is a brand that I will need to keep my eye on in the future because they know how to make a quality product.
I also like the reusable tooth protector that come on these . This makes these much easier to store without the need to wrap them with something to keep the teeth from being damaged, or to keep them from damaging something else because these come very sharp.
These blades perform as well as some of the bigger name brands out there, but for a little less money, so for this reason, I would rate them at a good value.
Extremely happy with these blades. My one picture shows, but these are nearly identical to the Freud brand. Cut 2X lumber like butter. Only question is long term durability, but can report back on that later. They are also very thin kerf for less resistance when cutting.
I got these so I would have less tear out while I'm building cabinets using my plunging track saw. I like the higher teeth count for a smoother cut. these look like great blades. I appreciate that they arrived with a cardboard separator to keep them from touching. and that they also have a reusable blade cover. that's a nice touch that you don't normally see. a good value for the price
These Ezarc 6 1-2 inch Circular Saw Blades are excellent for framing and for cutting laminate flooring; they make clean cuts and resist resin build-up. The nonstick coating means a longer blade life which is a timesaver because you won't be changing blades as often. They work great on corded or cordless circular saws. The 1.5 mm terf means more precise cuts and less material waste.
I ordered the EZARC 7-1/4 Inch 60 tooth super thin kerf (12mm) carbide tipped circular saw blades to see how well they would do on my portable circular saw for some fine cutting of birch plywood. I typically use the saw more for crosscutting and less for fine work, so I was anxious to see how they perform. They did not disappoint, cutting straight and true with virtually no splintering. What an incredible value for two quality 60T blades. The non-stick coating is amazing and, I am sure, helped tremendously with the performance. Highly recommended!
Review for: EZARC 7-1/4 Inch Circular Saw Blades 60T - Ultra Finish Wood Cutting Blade, Ultra-Thin 1.5mm Kerf, Non-Stick Coating, 2 Pack 2509-020
This 2 Pack of 24T x 6 1/2'' x 5/8'' arbors are manufactured to an excellent level of quality for wood cutting accuracy.
Designed for either corded or battery operated machines at a maximum 10000 RPM.
Touts 10 times lifetime use is Wow��I'll have to report back on that one but, seriously they are built awesome unlike the majority of other saw blades on the market.
Fantastic Value!
The EZARC circular saw blade is an excellent fit for my Ridgid battery-powered circular saw. The blade is extremely sharp, producing clean and straight cuts every time. The 60T blade produce very fine, smooth cuts with no tear-out, making it perfect for detailed work. I'm very impressed with the overall quality.
While my testing was limited, these blades provided an impressively smooth surface. I used it for simple cuts normally reserved for more aggressive blades, just because that's what I needed at the moment. These blades were easier to handle, cutting through wood like it was butter. The cut was smoother but faster than the blade it was up against (admittedly, more worn). I had considered getting the more ''general'' blades with 40 teeth and I still may, but the only advantage of that would be cost savings, as these blades not only did not slow down the cut, they just handled better.
They come with a length of slit tubing protecting the blade edges. That can be replaced for storage - with effort.
These saw blades fit onto my circular saw just as expected and just like other saw blades have in the past. I have made over a dozen cuts in 2 by 6s and 2 by 4s and the blades leave a nice clean cut. So far, these blades are working out well for me and glad I have them, the true test will be to see how long they last.
Extremely clean cuts in trim, molding, and 1x4 planks. The Teflon coating insures a no stick cut even when pushing the circular saw forward at a slow pace. I can't honestly say that I noticed any reduction in blade noise due to the special ''?'' cuts in the blade. Always remember that new Teflon coated blades perform really well, but when the blade is used for 50 or more cuts that special coating will wear off and then you will have just a normal carbide tipped blade.
Great blades for circular saw. Perfect fit for 6 1/2'' bladed saw with a super fast and clean cut. No issues with binding or build up. Highly recommended
Nice blades. I have yet to use them however based on appearance they look sharp and solidly made. Price was amazing and for 2 blades! I pay more for one normally.
These are really good circular saw blades, and I used them in my track saw, primarily for cutting back panels out of 1/4'' plywood for furniture. The ATB teeth, which are also TiCo tipped, minimize or all but eliminate any splintering. The coating doesn't really come into play much with 1/4'' plywood since it's so thin, but with other lumber, it does help eliminate friction when cutting thicker boards. These aren't economy blades, but more of a higher performance blade, and you pay a slight premium for them, though you do get two, and there's 60 teeth. Very nice blades, I'd get them again, it's a good brand.
I've been using these blades on my DeWalt circular saw, and the cutting speed has been excellent. They handle framing wood easily and with no problems at all.
The ultra-thin kerf makes the cuts smooth and efficient, without much resistance. The non-stick coating also helps prevent buildup, so the blade stays clean longer. For the price of a 2-pack, it's definitely a good value.
These are high quality well made. They are nicely balanced and very sharp. There's no wobble and they fit nicely on my Milwaukee saw. The cuts are clean and accurate and I couldn't be more pleased. They have a very good weight to them and they don't get too hot while using. I imagine they will last for a while I made a 100 cuts already and you can't tell. Excellent value.
I rate these blades a good value. ($29 for two blades)
For my woodworking hobby I use higher quality blades, but I also pay a lot more for them and I sharpen them so they last a long time.
These blades I use for routine work that does not require precision for example cutting 2x4s at the wood shed.
They are definitely thinner kerf, and the blades are sharp. The teflon coating seems to be good. Test cuts were quick and smooth, very little splintering.
I've used ezarc blades for my reciprocating multi-tool and I viewed them the same way - better than harbor freight, but not furniture making quality. So, good value for the money.
These circular saw blades feature 60 teeth for fine, clean cuts on wood and similar materials. The quality of the carbide tips is impressive, resisting dulling after multiple uses on various projects. Durability holds up well, with no chipping or warping noticed during extended sessions. Ease of use is straightforward, as they mount easily onto standard saws and spin smoothly without vibration. They provide a nice finish cut with no or little splinters, making them ideal for woodworking. They fit on my dewalt circular saw nicely. In real-world performance, they excel at delivering professional-level results on trim and plywood. Though a little high-priced, the value is justified by the consistent, tear-free edges they produce.
Honestly not much to say, it just works. Got this for some trim work and a few MDF cuts and it went through everything super smooth. Clean cuts every time, no weird burning or splintering like I've had with cheaper blades. I didn't even have to sand the edges after, which was a nice surprise.
No complaints so far. I've used it on my cordless saw and it didn't bog down at all. Vibration's low, noise is decent, and it feels solid. If you're on the fence, I'd say go for it. Not flashy, just does the job well.
This is the 60T version for use on plywood and other substrates where you want to cut more slowly and carefully. These are solid discs, obviously made of heavier metal. Sharp teeth, smaller gullets so don't expect a ton of chip clearing capacity. Photos and demo to follow.
I've been very impressed with the EZARC 6-1/2'' 60T Circular Saw Blade. Right out of the box, it delivered incredibly clean and accurate cuts on a variety of wood types. The 60-tooth design provides a super-smooth, ultra-fine finish with virtually no splintering, which is especially nice when working with plywood or trim pieces.
The blade runs true with minimal vibration, and it stayed sharp even after extended use��far better than many blades in this price range. Whether you're doing cabinetry work, fine woodworking, or just need a reliable blade for everyday project cuts, this one provides excellent results and great value.
Highly recommended for anyone looking to step up their cutting precision without spending a fortune!
I use my DeWalt 6-1/2 inch cordless saw frequently. These are great blades. They spin true. They are super sharp. The kerf is very thin. They are durable and last a good while. These are a great value for the money.
These are actually a bit more expensive than the ones I usually get at the big box store, but they are VERY nice. The thin kerf and non-stick coatings make for smooth precise cuts. Fits my Milwaukee 6-1/2'' framing saw perfectly. I'm skeptical of the 10x longer life claim, but I haven't cut enough to test that claim yet. I'll update the review when it comes time to swap the blade; if they really do last 10x as long then they are acutally MUCH cheaper than the big box store options.
These ''ultra finish'' saw blades work great. I've been running the 60 tooth one in a DIY track saw jig, and it works great on a variety of materials. It's made some remarkably clean cuts on particle board, and it's done well on cheap melamine topped particle board, too. It cuts fine in wet pine from the big box stores, as well. Also, the thin kerf seems to make it easier on the battery power circular saw. Surprisingly, after slumming it with all this cheap stuff that's full of sap and glue, the blade doesn't look bad. It's not all gummed up, and what little debris that is stuck to the blade comes right off with some degreaser.
Oscillating Multi-Tool Blades
Reciprocating Saw Blades
Cutting & Grinding
Hole Saw
Drilling
Sanding & Polishing
Socket & Driver Set
Hand Tools
Metal Worker & Fabrication
Woodworking & Carpentry
Electrical & Plumbing
Automotive
Concrete & Masonry
Demolition
NEW ARRIVALS
