• 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal - EZARC Tools
  • 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal - EZARC Tools
  • 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal - EZARC Tools
  • 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal - EZARC Tools

9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

$19.95
$19.95
1111111 Sold out

SKU: 804011

Free Returns Within 30 Days
Free Returns Within 30 Days
Free Shipping Over $25
Free Shipping Over $25
Warranty up to 24 Months
Warranty up to 24 Months

Details:

  • Extreme durability and no teeth breakage for any tough job
  • Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood
  • Smooth cuts with perfect cutting result
  • All in one design: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works
  • Replaceable high quality pilot drill bit are available

EZARC Carbide Hole Saw Heavy Duty：

 

[detail]

Product Description：

Material: Carbide

Type: from 9/16'' 14mm to 4-3/4'' 120mm

Size: from 1.97 x 4.53 x 1.38 inches/ 5 x 11.5 x 3.5 cm

to 4.8 x 4.8 x 2.68 inches/ 12.2 x 12.2 x 6.8 cm

Weight: from ‎0.81 ounces/ 120g to 2.23 pounds/ 880g

Compatible Material: Aluminum, Plastic, Metal, Stainless Steel

Free shipping over $25.

  • Orders under $25 ship for $3.75.
  • Orders are processed within 1–3 business days and shipped from the nearest available EZARC warehouse.

Estimated delivery:

  • USA & Canada 3–7 days
  • UK, Germany & France 5–8 days 
  • Australia 7–10 days 
  • Other regions 10–25 days.

Once shipped, you’ll receive a tracking number by email. Local stock shortages may add approximately 3–5 days to delivery.

Returns & Refunds

Please contact us within 30 days of delivery for damaged, incorrect, or quality-related items. Approved refunds are returned to your original payment method. For other eligible returns, return shipping and original shipping charges may not be refundable.

See our full Shipping Policy and Refund Policy for details.

Within 30 days of product delivery, if you encounter any of the following issues, we will offer a refund or product replacement:

  • Product arrived damaged
  • Incorrect product received
  • Quality problems during use

Contact us at support@ezarctools.com

We'll get back to you within 3 business days.

For your safety and proper use, please click and read all safety warnings and instructions upon your purchase.

  • Please check our full faq here. if you still have questions, please contact us here:)
9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal - EZARC Tools

9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

$19.95
$19.95
SAVE Liquid error (snippets/price line 129): Computation results in '-Infinity'% Sold out
View full details

See It in Action

    Trusted by pros Who Know Best

    Reliable quality is our attitude towards consumers

    • EZARC is your best choice when considering cutting speed and cost performance, maybe there is no better one than it. I recommend it to everyone.

      @projectfrom

    • I have tried about every blade out there and these seem to be top shelf. I'm not gonna say they are the best but i will definitely be purchasing more.

      @Mechanically

    • Oh, let me tell you about the incredible Diamond Cutting Wheel! This tool defies all expectations and cuts through metal like a hot knife through butter.

      @soyflaco

    • Great products.This disk is immortal. I've cut so many things its hard to understand how the disk even exists anymore, let alone still cuts things.

      @brc_framers

      Customer Reviews

      Overall rating: 4.8 / 5 from 67 reviews.

      Customer photo review of 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      I had to drill through a Kohler sink made of very thick high quality stainless steel. I purchased two bits just in case one failed. One bit was the least expensive I could find and the other was a mid priced unit, this one. The difference in quality was obvious immediately just looking at the two products. The materials construction and design of the Ez-arc was far superior compared to the budget bit. It's important when drilling stainless to go thru the first attempt and not build up too much heat so I used the Ez-arc along with cutting oil and my drill set to the lowest speed setting. As you can see in the photo the Ez-arc did an excellent job shaving off layers of the stainless. It cut thru fast & clean and the carbide teeth were as sharp as new after the cut. I'm very pleased with the results and wouldn't hesitate to purchase another Ez-arc bit in the future. I'm not associated with this product or any other product. I received nothing in return for my review.

      Joe 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Customer photo review of 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      This thing works great! Just have to follow directions. I put a little oil to allow the drill bit to run smoothly. It seriously cuts like butter like other reviewers mentioned. I used it to cut two holes for soap dispenser on my Kraus stainless steel sink, sink thickness is 18 gauge. I used some painters tape to limit the mess/clean up. Have fun!

      Prime 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Customer photo review of 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Purchased this hole saw with pretty low expectations to be honest. After getting my hands on it boy was I wrong!This hole saw is by far the heaviest I have and sturdiest out of my collection of various hole saws from different brands and sizes from 1 to 3. Not only does it feel skookum it cuts beautifully! In the picture you see of my bumper, I had 2 other saws that were just warping and cutting all over the place. This product made quick work of what those others saws struggled to do.I would estimate the bumper I cut is between 1 to 2mm thick and some level of steel harder than stainless. This hole saw by far exceeded my expectations and didn't look any worse for wear by the end of the cut! I did use a little oil to help however, which is never a bad idea when working with tungsten.I will definitely attempt to buy this brand in whatever other sizes I need in the future. 5/5 recommend.

      Ben M. 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Customer photo review of 9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Purchased this hole saw with pretty low expectations to be honest. After getting my hands on it boy was I wrong! This hole saw is by far the heaviest I have and sturdiest out of my collection of various hole saws from different brands and sizes from 1" to 3". Not only does it feel skookum it cuts beautifully! In the picture you see of my bumper, I had 2 other saws that were just warping and cutting all over the place. This product made quick work of what those others saws struggled to do. I would estimate the bumper I cut is between 1 to 2mm thick and some level of steel harder than stainless. This hole saw by far exceeded my expectations and didn't look any worse for wear by the end of the cut! I did use a little oil to help however, which is never a bad idea when working with tungsten. I will definitely attempt to buy this brand in whatever other sizes I need in the future. 5/5 recommend.

      Ben M. 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      I purchased this product in the 3 size; I had never used this type/size of tool for heavy metal. Very pleased with how this worked...slow speed and plenty of oil resulted in several clean cuts with no diminished performance. The only negative is that the center bit broke off during the last cut. I would recommend this product.

      Dwayne 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Got this to drill a couple holes in a sink I was gifted. I've never touched a drill before, or replaced a sink, so I was worried I'd break this. However, It did superb! Just go slow and steady; keep it oiled up and it should do fine. I drilled two holes in about 60 seconds. I bet I could get several more uses out of it before it got dull. Definitely going in my tools for future use! Loved it, and will purchase again if needed.

      Jatoav8or 4/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      I have used these as well as other brands over the last several years. The metal I am putting the holes for conduit in are many times thicker and tougher then standard electrical boxes. for the money, I'll buy these again.

      Daniel J. 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      Just as good as the name brand like ideal. I am electrician an i am drilling holes in panel cans constantly. These work great an the case is great everyone i work with is ordering a set after using mine. Great product

      Christopher 4/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      I have a set of Bosch hole saws that are rated for use with an impact drill that hold up better than these. The welds on the 1/2inch hole saw failed after the 6th use. Once one blade failed the others sheered off in quick succession

      Barry 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      I bought these based on reviews on Amazon. I typically buy higher priced Diablo or Milwaukee blades, but wanted to give these a try. One blade cut through nails & concrete screws easily using a 12V Fuel Milwaukee Multi Tool. Best performance hands down over the more expensive blades. Definitely sold!!!

      Errol B. 5/5 Verified

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal

      I absolutely love these things I'm a commercial electrician and I use them about 3-4 times a week and I haven't had to replace them yet almost been a year. There exactly the same as the ideal and klein carbide cutters cut awesome mine have surface rust on them from not having them in the case. But if you run them in even and on low there will last forever

      Jim 5/5

      9/16 inch - 2-15/16 inch. Carbide Shallow Hole Saw for Hard Metal