Oscillating Multi-Tool Blades
Reciprocating Saw Blades
Cutting & Grinding
Hole Saw
Drilling
Sanding & Polishing
Socket & Driver Set
Hand Tools
Metal Worker & Fabrication
Woodworking & Carpentry
Electrical & Plumbing
Automotive
Concrete & Masonry
Demolition
NEW ARRIVALS
Love Those Blades
Universal Fit Diamond Grit Oscillating Blade Set For Grout and Soft Tile
Diamond Oscillating Blade, Flush Cutting Oscillating Multi Tool Saw Blades for Grout Removal, Cleaning Mortar
Built Tough for Real Tile Work
Clean Cuts, No Chipping
Fits Almost Any Multi-Tool
Worry-Free Delivery® available with
seel
learn more
Free Returns Within 30 Days
Free Shipping Over $25
Warranty up to 24 Months
Shipping
- Free Shipping: Orders over USD 25
- Standard Shipping: USD 3.75(order under USD 25)
Shipping Time:
- USA: 3-7 days
- Canada: 3-7 days
- UK: 5-8 days
- Australia: 7-10 days
- Germany: 5-8 days
- France: 5-8 days
- Other regions: 10-25 days
Tracking: After your order is shipped, you will receive an email with a tracking number to monitor the delivery status.
EZARC operates over 20 warehouses worldwide, and your order will be shipped from the nearest one.
Due to inventory availability, some orders may be fulfilled from a different warehouse than originally planned. In such cases, shipping times may exceed the estimated delivery window.
Rest assured, we prioritize the fastest possible fulfillment and will keep you informed throughout the process.
Warranty
Within 30 days of product delivery, if you encounter any of the following issues, we will offer a refund or product replacement:
- Product arrived damaged
- Incorrect product received
- Quality problems during use
Contact us at support@ezarctools.com
We'll get back to you within 3 business days.
For your safety and proper use, please click and read all safety warnings and instructions upon your purchase.
Description
- 【Diamond Cutting Edge】This premium long lasting flush cutting diamond oscillating saw blade has 5 times longer life than carbide grit blades in tough applications
- 【Precise & Clean Cut】 Diamond grit edge has a kerf approx. 1/16 inch (1.6 mm), which can achieve a perfectly clean and precise cutting effect. Oscillating diamond blade is particularly suitable for precise cutting and short cutting as well as precise working right into corners and on edges
- 【Design for Tough】This diamond oscillating multi tool blade is used to remove defective tile grout, clean up the mortar, plaster, and porous concrete to clean and rework planked deck joints
- 【Application Scenarios】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove grits or grouts, clean up the mortar before fixing, and various household maintenance around the house
-
【Universal Fitment】 EZARC oscillating multitool blade set includes two additional adapters, which is compatible with most oscillating multi-tool brands like Dewalt, Dremel, Milwaukee, Fein, Bosch (Non-StarLock), Makita, Genesis, Ridgid, Craftsman, Rockwell, Black & Decker, Porter-Cable, Worx, AEG, Ryobi and more
30 Days Free return
Try it today—if it’s not right, return it free within 30 days.
Free Shipping Over $25
Economical Flat Rate Shipping for orders under $25 worldwide.
Warranty up to 24 Months
We’ve got you covered—enjoy peace of mind for up to 24 months
Trusted by pros Who Know Best
Reliable quality is our attitude towards consumers
@Project Farm
EZARC is your best choice when considering cutting speed and cost performance, maybe there is no better one than it. I recommend it to everyone.
@Mechanically
I'm a contractor and I have tried about every blade out there and these seem to be top shelf. Im not gonna say they are the best but i will definitely be purchasing more.
@medomechanic
Oh, let me tell you about the incredible Diamond Cutting Wheel! This tool defies all expectations and cuts through metal like a hot knife through butter, that’s simply out of this world!
@soyflaco0
This countersink set is a must have in your tool box. It is important if you're a stickler for finishing jobs and want everything to look amazing and beautiful. It is very durable and will last after job.
@brc_framers
This disk is immortal. I've cut so many things its hard to understand how the disk even exists anymore, let alone still cuts things... I will encourage others to buy them.
5.0つ星中4.8つ
195件
Customer Reviews
Overall rating: 4.8 / 5 from 195 reviews.
Great Tool !
Universal Fit Diamond Grit Oscillating Blade Set For Grout and Soft Tile
Had the regular size tile and grout blades from the same brand but project required greater depth. Cut through some structural S mortar and a little brick. Very slow on the brick would recommend and simple diamond blade angle grinder or circular saw with stone blade. For grout and fine finish work there is nothing better. Price is fair but not really a deal. Worth the price of a consumable tool head. Would recommend and buy again if needed.
Used this blade to remove 30 year old hard cracked grout so that it could be replaced with silicone caulk. Tool did the job quickly and very well. Only needed to use one of the 3 blades received and it will be used again - good wear life.
These blades fit my DeWalt DCS355 oscillating tool without any issues. The diamond coating on the blades chews through grout, and the curved design of the blade allows me to ease it into the grout line, lessening the chance that I'll chip a tile. These blades have approx. 1.4mm kerf at the diamond cutting edge, thin enough for 1/16'' (1.6mm) grout lines.
These blades fit my oscillating saw and give a flush, clean cut on wood or plastic. They have a quick release feature, which is great for safety, and it makes it easy to interchange blades. The curved edge helps with stability and reduces vibration and friction. The hardened teeth stay in place so makes it easy to maneuver around tight spaces. Works with Dremel and Bosch saws and lasts 5x longer than Carbide Grit blades. A great addition to my toolbox!
I have many power tools but only discovered oscillating saws about 2 years ago - I don't know how I lived without one! Mine is a DeWalt DCS356 3-speed 20V Max which has a spring-loaded blade release mechanism which accepted these blades without any problem. I have a bunch of wood and metal cutting blades but no diamond-tipped ones so I was happy to check these out. The blades are slightly springy and look like polished steel; they measure 1.4mm thick at the diamond-covered end. I tried cutting a small ceramic tile held in a vice and the blade cut through it very easily, the cut shown in my picture took maybe 5 seconds to make. I tested it on a concrete floor and it cut in without too much effort. I believe these would also be great for cutting out a brick in a brick wall. Even after the cuts I made, the used blade looked like the other 2 so I guess they will last a reasonable time. They are high quality and I think they are good value for the 3 pack. Recommended.
Installed an additional exterior light. This oscillator attachment allowed me to cut the vernier stone perfectly. Great price and performed better than expected, will buy again.
Works good but I'm sorry no pictures
Store owner replied: We’ll put this review on our fridge right next to the pizza coupons. Seriously though – thanks for the boost! 🍕
Used to de-grout the tile. Worked well bit it took 2 of them to get through the job.
Used to de-grout the tile. Worked well bit it took 2 of them to get through the job.
Universal Fit Diamond Grit Oscillating Blade for Grout and Soft Tile,ELD58
Great Quality - Great Fit - Great Price!! I have an off brand oscillating tool and I was concerned that it might not fit because the brand is not often listed in product compatibility. However, this blade fits perfect without the need for the included adapter. The diamond grit is extremely durable and very well adhered to the blade. This is intended for grout removal but can also be used for a variety of purposes only limited by your imagination and confidence level. This is the perfect addition to your tool bag if you work with tile often.
These blades are great, bought a similar blade from Lowes lasted a couple hours. Used these blades on a large walkin shower and you can't tell I used it. Outstanding blades. Thank you
Nice blades, very good quality. I had hoped they would cut tile but not so much
I was able to clean all cement around the cement block easily.
Worked well
Good
I initially had a bad experience with these blades, but the service team reached out proactively and wanted not only to make it right, but find out WHY i had a hard time. That says alot and shows me that I just had bad luck. I would trust this brand again for replacements.
They are just fine and not expensive.
I needed to enlarge a remodeled shower drain by one-quarter inch as the drain was installed at (a standard) 4'' and the replacement drain I bought was actually 4.25''. The only blade to consider cutting ceramic or porcelain are blades like these - diamond tipped. These did the job nicely with my multi-tool and left a nice sharp square that allowed me to perfectly fit my new drain.
Good blades came quick
Works great for removing grout
Why did you pick this product vs others?: Durable and well made, used to grind excess cement off concrete steps and remove rough edges.
Works great on grout!
good material
I bought these months ago for another project. I was in a time crunch and they did not arrive in time so I used every other brand available locally. Milwaukee, Diablo, Dewalt, etc. These got the job done but I burned through a lot of them on a relatively small job. Fast forward to a week ago. I had another failed shower repair job. Hands down these are the best blades for cutting through grout, cement board, thinset and some tile. They are sharp enough to make the initial cut and stay on track without bouncing around. They held up through a much more material than the other brands. To the point I was getting quite aggressive and basically abusing the blades. Excellent durability, remained sharp and therefore safe and accurate. If the blade is not sharp enough it will bounce around and scar the adjacent tile...making the job bigger, more time consuming and more expensive. And they are much less expensive than the box store brands. I have ordered more just to keep in my tiling tool kit. Quality, durability, and value all top notch. I try out EzArc's other oscillating blades with hopes they are as good as these.
They do the job, thank you.
Why did you pick this product vs others?: I was looking for blades that would cut into concrete block wall (I had to drop 6 outlets and 2 low-voltage boxes). We needed a clean cut without breaking the concrete. These worked about as well as I could have hoped.? Cutting ability: They met expectations. You have to be patient with concrete and an oscillating tool. If you need to move quicker, you'll have to buy a concrete saw. This was perfect for cutting rectangles for outlets and low-voltage boxes.? Cutting speed: It's a multitool blade. It's not going to cut fast....it was never supposed to. These are great blades. They do their job, and they last a proper amount of time. The price is the win here. It doesn't make sense to over-invest in blades. They do a great job at their price point.?
Got these to cut through a plaster wall in a mid 50's house during a renovation. Did a nice job with less dust than a more aggressive method. For the price, I'm very pleased.
Honestly they're really good for the price, they're a little thick for smaller grout lines, but overall a great buy for diy jobs.
Great product, excellent price
The rounded diamond blades work much much better. Not sure why but these have a hard time getting through the same stuff.
Very happy with these, I cut out 3-4 sq feet of tile and used one and a half blades, not bad for a economy brand
Works perfectly for cutting precise holes in old plaster walls.
Works great for cleaning out grout!
Have gone through half a dozen or so diamond blades for my multi tool. These are by far the best and are already on my reorder. They not only cut faster than the others but last at least twice as long, making them a high performance bargain!!
Looks good ???? haven't tried yet.
I used it with my Ryobi multitool and it worked! Order it now!
Having worn out a few ''normal'' multitool blades making cutouts in plaster or gypsum walls, I have been amazed at the effectiveness and longevity of these blades in making such cuts. Definitely worth the price.
Pretty good blades !