The blades cut like butter. As a scrap man I need blades that cut fast and last LONG YOUR BLADES ARE SECOND TO NONE
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
BLACK FRIDAY ANTICIPADO | AHORRA 20% | COMPRA AHORA>>
Subtotal$19.99
Sin duda alguna, esta es la mejor rueda de corte que encontrarás en el mercado. Mucho más resistente que el disco promedio. Le he dado miles de cortes y sigue como nueva. Si quieres cortes suaves y precisos sin que la rueda se desgaste demasiado rápido, esta es la que tienes que comprar. Consigue un juego para tener a mano o para esos trabajos más difíciles — ¡en serio, son unas ruedas de corte muy resistentes!
SKU: 80711505
No se pudo cargar la disponibilidad de retiro
Si busca una rueda de corte resistente y fiable, tengo que decirle que esta es una verdadera ganadora.

1 equivale a 100, el disco de corte de diamante EZARC ofrece más de 5,000 cortes para metal con un costo por corte mucho menor en comparación con los discos de corte aglomerados.
Ideal para el corte en seco de metal, varillas de refuerzo, hierro, perfiles de latón, aluminio, diferentes tipos de tuberías y láminas de metal con una vida útil más de 100 veces mayor que la de los discos de corte aglomerados en aplicaciones de corte de metal.
El cuerpo de la rueda de acero sólido reduce en gran medida el riesgo de rotura y lesiones para mayor seguridad, el filo de corte de diamante está 100% libre de contaminantes, no se desgasta como los abrasivos aglomerados, reduciendo las partículas de polvo para una estación de trabajo más limpia.
RENDIMIENTO, PRECISIÓN, LONGEVIDAD, ESTABILIDAD E INTEGRIDAD de corte precisos con calidad asegurada, cortando durante más tiempo, más rápido y de forma más fiable que otras ruedas que pueden romperse o desgastarse prematuramente.
Mantiene el diámetro original de la rueda durante toda la vida útil de la hoja para un mejor control y un corte de precisión.


Una vez enviado, recibirá un número de seguimiento por correo electrónico. La falta de existencias locales puede añadir aproximadamente 3–5 días a la entrega.
Póngase en contacto con nosotros en un plazo de 30 días a partir de la entrega para artículos dañados, incorrectos o con problemas de calidad. Los reembolsos aprobados se devolverán a su método de pago original. Para otras devoluciones elegibles, los gastos de envío de devolución y los gastos de envío originales podrían no ser reembolsables.
Consulte nuestra Política de envíos y nuestra Política de reembolsos para obtener más detalles.
Dentro de los 30 días posteriores a la entrega del producto, si experimenta alguno de los siguientes problemas, le ofreceremos un reembolso o la sustitución del producto:
Contáctenos en support@ezarctools.com
Le responderemos en un plazo de 3 días hábiles.

EZARC es su mejor opción si tiene en cuenta la velocidad de corte y la relación calidad-precio; quizá no haya ninguna mejor. Se la recomiendo a todo el mundo.
@projectfrom
He probado casi todas las cuchillas que hay y estas parecen ser de primera categoría. No voy a decir que sean las mejores, pero definitivamente compraré más.
@Mechanically
¡Oh, déjame hablarte de la increíble rueda de corte de diamante! Esta herramienta supera todas las expectativas y corta el metal como un cuchillo caliente corta la mantequilla.
@soyflaco
Excelentes productos. Este disco es inmortal. He cortado tantas cosas que cuesta entender cómo sigue existiendo el disco, y mucho menos que aún corte cosas.
@brc_framers
Overall rating: 4.7 / 5 from 282 reviews.
The blades cut like butter. As a scrap man I need blades that cut fast and last LONG YOUR BLADES ARE SECOND TO NONE
Wayne B. 5/5 Verified
Worked great and much safer than breakable discs
Darin W. 5/5 Verified
So far it’s working pretty good. Compared to the abrasive wheels I’ve noticed it’s still cutting and the diameter hasn’t changed. I would have probably used three or four of the others by now. There is no dust but there are sparks which when cooled, are tiny bits of metal. Eye and ear protection is a must. Fortunately after cutting my nose is not all black so that’s good news. I’m still cutting on the first disc. Getting used to it will take a little longer but I think it will be worth it. And lastly, I’m interested in seeing how long it will continue to cut before I have to replace it. I’m cutting mostly 12 gauge mild steel sheet metal.
Richard S. 5/5 Verified
Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox
Store owner replied: Thanks for choosing us. Appreciate the support!
Cuts straight, sharp, cuts fast and disc doesn't fall apart like a traditional fiber disc
Randy C. 5/5 Verified
Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox
Store owner replied: Thanks for choosing us. Appreciate the support!
Anything that doesn’t fly apart while cutting is a friend of mine!
Marvin C. 4/5 Verified
Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox
Store owner replied: Thank you!
These blades are awesome!! I had to cut off a bunch of foundation bolts and it went through them like butter!!
Jeff T. 5/5 Verified
Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox
Store owner replied: Glad it’s doing the job! That’s what we like to hear.
Best cutting disc I’ve ever used did a leaf spring relocate kit on my 56 Chevy and half the time and half the amount of disk used
L Dean W. 5/5 Verified
Diamond Metal Cutting Wheel For Rebar/Steel/Iron/Inox
Store owner replied: Aww, this just made our team do a happy dance! Thanks for being awesome!
I bought 2 for a couple projects that I was going to be cutting a lot of steel from 1/8 flat bars to 5/8 round bars. I completed both projects and haven't gone to the second wheel yet. I've probably made at least 50 cuts on the original wheel and it still cuts very efficiently. I would highly recommend. In the long run, they'll save money over conventional cut off wheels and are definitely safer because they don't break or chip.
Bill S. 5/5 Verified
This blade was a good purchase. Some comments described it as cutting through 1/2 inch rebar in.like a hot knife through butter in.. I didn't see that but can get through one in about 90 seconds. It's for you to decide whether that's too long but I'm fine with it. As to longevity, I made 28 cuts through 1/2 inch rebar for a project and the only wear was to the paint. The abrasive surfaces are still completely intact. You can see what it looks like after these cuts in the picture. My experience with regular aluminum oxide mesh disks is four or five cuts at a maximum.
Mcripps 5/5 Verified
i bought this to cut up alot of scrap metal, i am accustomed to those thin cut-off discs but they always seem to explode or just simply wear down quickly. this diamond wheel was cutting steel, metal /alloy like a hot knife through butter but after around 4 / 6 cuts of thick steel (20mm) the wheel started to lose its momentum. it was taking longer to cut through the same steel that it just sliced through. i eventually stopped using it, switched it out for a thin cut off disc to finish the task. customer service reached out and was very professional they actually took the time to talk with me so they could understand what went wrong. 5 stars. they pointed me to a cut off wheel that is more suitable for the task.
Gh905 5/5 Verified
I recommend the sawing excellent see how long it lasts I bought it for a stationary clamping machine
Russell W. 5/5 Verified
I couldn't imagine one of these blades could do 5000 cuts of anything, but I decided to give two of them a try over the pack of 25 discs I usually buy. The Graff disc took 3:54 to cut through 1.25 rebar. Unfortunately, as the abrasive edge quickly wore off, the blade would heat up and bind, triggering the thermal protection on the grinder. I'd pause the timer and let it cool off to start again. Total cutting time was more like 8 minutes. That compares poorly to the Ezarc Metal Master disc which cut through in 2:22 with no pauses. The abrasive edge feels tougher on the Ezarc and there's more of it left. 5000 cuts through 1.25" rebar? No, but I'd say the Ezarc has about double the life of the competition and will last at least as long as 25 discs with no changes needed.
Just S. 5/5 Verified
Using it to cut thru old galvanized pipes. Cuts like butter.
Jason S. 5/5 Verified
Works great and lasts long. Will reorder
David A. 5/5 Verified
What i need, but have not started the job yet.
Edwin W. 5/5 Verified
Thank you very happy 🤗👍
Kevin (grasshopper) V. 5/5 Verified
So far so good it’s been great to cut with I have tried other brands and they disappointed me these are showing great quality.
Patrick G. 5/5 Verified
Worked good so far
Mike S. 4/5 Verified
Have used on 18ga. sheet metal and 1/8 mild steel tubing works great on both .
Robert B. 5/5 Verified
Great product, every thing I've bought is very good. Last much longer that what you can buy at the big box stores
Danny C. 5/5 Verified
Without a doubt the best metal cutting wheel ive ever used Thank You Thank you Thank you 😊
Richard H. 5/5
works great!
Stan B. 5/5 Verified
Great product and fair pricing. Also, great shipping and deliver as advertised.
Harris A. 5/5 Verified
Great product thank you for the cutting disc
Arik S. 5/5 Verified
I didn't want to review yet as only used on 20mm rebar. Its not as good as a fibre disk as it snags feels like the start or friction welding. Im sure it will out last fibre disks still feels sharp after 10 cuts. Haven't used on sheet steel yet. Hence middle of the road score. The price was good. Gave my neighbour 1 of the 5 disks but he hasn't used yet
Paul H. 3/5 Verified
Everything I've perchance I've been very happy with the tools have the jobs that were ment to do and so I'm very happy with the performance and quality that they provided a big thumbs up 👍
Daryl P. 5/5 Verified
Amazing quality lasts for ages
Andrew M. 5/5 Verified
Very good quality products.
Colbert M. 5/5 Verified
These cut off wheels are the best. Very long lasting and get the job done.
Clark O. 5/5 Verified
I finally got to use them today. They are awesome. I cut some wood, nails, and some steel. Glad I bought these.
John M. 5/5 Verified
Poor customer service. It has been 22 days since I have ordered the product and still have not received it. Will not order from this company again.
Jim S. 1/5 Verified
i took a chance , i did not know what to expect . i was really surprised, that thing cuts really fast without putting any pressure on the grinder at all .
Normand G. 5/5 Verified
Good gear for a great price 👍👍
Jani V. 5/5 Verified
Good quality 👍
Ben C. 5/5 Verified
sorry, haven't used it yet.
Daniel S. 3/5 Verified
Love the flapper disc and a diamond blade. They are the only thing of you so far they seem to work great
Kenneth E. 5/5 Verified
Works great
Grant S. 5/5 Verified
Exactly what I needed!
Kristy W. 5/5 Verified
I use the metal cut off wheels for cutting various metal products in my shop.
Rayford C. 5/5 Verified
Cuts metal quickly and in a straight line. Much easier and cleaner than normal cutting wheels.
Mark C. 5/5 Verified