Disco de corte reforzado con fibra de vidrio de 1-1/2 para acero endurecido, aluminio, plástico
Si tienes una Dremel o cualquier herramienta rotatoria, necesitas este kit, y punto. Estas 30 ruedas reforzadas con fibra de vidrio duran mucho más que los discos que venían con tu herramienta y cortan acero, pernos y aluminio sin romperse. Incluye 2 mandriles sólidos para cortes más suaves y seguros, todo empacado en un estuche resistente para que estés listo para cualquier trabajo, ya sea un perno oxidado, chapa metálica o tu próximo proyecto.
Envío estándar: 3.75 USD(pedidos inferiores a 25 USD)
Tiempo de envío:
EE. UU.: 3-7 días
Canadá: 3-7 días
Reino Unido: 5-8 días
Australia: 7-10 días
Alemania: 5-8 días
Francia: 5-8 días
Otras regiones: 10-25 días
Seguimiento: Después de que su pedido sea enviado, recibirá un correo electrónico con un número de seguimiento para monitorear el estado de la entrega.
EZARC opera más de 20 almacenes en todo el mundo y su pedido se enviará desde el más cercano.
Debido a la disponibilidad del inventario, algunos pedidos pueden ser enviados desde un almacén diferente al inicialmente previsto. En tales casos, los plazos de envío pueden exceder el período de entrega estimado.
Tenga la seguridad de que priorizamos la tramitación más rápida posible y le mantendremos informado durante todo el proceso.
Garantía
Dentro de los 30 días posteriores a la entrega del producto, si encuentra alguno de los siguientes problemas, le ofreceremos un reembolso o un reemplazo del producto:
consulte nuestras preguntas frecuentes aquí. si aún tiene preguntas, contáctenos aquí:)
Descripción
Durabilidad superior
Los discos de corte EZARC están reforzados con fibra de vidrio para una mayor durabilidad, lo que los hace ideales para cortar, recortar y ranurar una amplia gama de materiales, incluidos acero endurecido, pernos, tornillos, chapa, madera fina, aluminio y plástico.
Corte preciso
Este disco de corte de 1.5'' realiza cortes limpios y sin rebabas gracias a su diseño ultradelgado, lo que garantiza un rendimiento suave y preciso para cortar metales duros con facilidad.
Especificaciones
Viene con 2 mandriles que se adaptan a la mayoría de las herramientas rotativas con un eje de 1/8”. Con un grosor de hoja de 0.045” (1.1 mm), construcción duradera de fibra de vidrio y una velocidad máxima de 45,000 RPM.
Almacenamiento conveniente
Incluye una robusta caja de almacenamiento de PP para mantener los 30 discos perfectamente organizados, protegidos de forma segura y fácilmente transportables para trabajos al aire libre y proyectos de bricolaje en el hogar.
Seguridad mejorada
Los discos de corte para herramientas rotativas EZARC de 1-1/2 cumplen con los estándares internacionales y los requisitos de seguridad como EN 12413, ASM07. Utilice equipo de protección adecuado durante el uso de discos de corte de 1.5'' y no exceda la velocidad máxima especificada.
Try it today—if it’s not right, return it free within 30 days.
Free Shipping Over $25
Economical Flat Rate Shipping for orders under $25 worldwide.
Warranty up to 24 Months
We’ve got you covered—enjoy peace of mind for up to 24 months
Trusted by pros Who Know Best
Reliable quality is our attitude towards consumers
@Project Farm
EZARC is your best choice when considering cutting speed and cost performance, maybe there is no better one than it. I recommend it to everyone.
@Mechanically
I'm a contractor and I have tried about every blade out there and these seem to be top shelf. Im not gonna say they are the best but i will definitely be purchasing more.
@medomechanic
Oh, let me tell you about the incredible Diamond Cutting Wheel! This tool defies all expectations and cuts through metal like a hot knife through butter, that’s simply out of this world!
@soyflaco0
This countersink set is a must have in your tool box. It is important if you're a stickler for finishing jobs and want everything to look amazing and beautiful. It is very durable and will last after job.
@brc_framers
This disk is immortal. I've cut so many things its hard to understand how the disk even exists anymore, let alone still cuts things... I will encourage others to buy them.
4.8/ 5.0
Este producto ha recibido 4.8 de 5.0 estrellas. Ha recibido 135 reseñas.
Customer Reviews
Overall rating: 4.8 / 5 from 135 reviews.
I am a metal sculptor and use Dremel cutting discs for fine sculpting. Don't get me wrong, they work well but are quite expensive and I can go through them rather quickly. As you can see from the pictures, I started with a piece of rusty metal rod and turned it into arms with hands and fingers. I decided to try these cutting discs and am very impressed with how they work. Even better, they came with 2 mandrels which fit into my Dremel. I also love the container which has impressions to hold the discs and mandrels so they stay in one place.
I should not have needed to complain to get the kit as advertised.
There were no mandrels in the box.
This was rectified - but getting it right first time would be the thing.
Worked great. I started a job and was only able to get about 2/3 before 3 other name brand cut-off wheels were completely ate up. Ordered EZARC just to get the job done. Finished using only 1 EZARC Cut-Off Wheel! And it barely looks used; as you can see in the pic.
I use my Dremel tool a lot and I like to have as many cutting bits and other accessories as possible so that I am ready for whatever job comes up without having to run to the hardware store. I like to have plenty of the consumable accessories like sanding drums and cut off wheels so that I don't run out. These are larger and a little bit thicker than the wheels that I use the most, but for bigger jobs they are better because they don't wear as fast and are not as prone to breaking as the smaller, thinner cut off wheels. These cut very well and are fiberglass reinforced so they are not as likely to break. The set came with two mandrels and work perfectly with my Dremel tool. I am happy to have found them and can recommend them.
I have used Dremel and Foredom motor tools for almost 50 years, often for cutting something with the very thin cutoff wheels that Dremel (and others) offer. You can see a comparison in one of the photos. It often takes me two or three of those wheels just to shorten a bolt. These EZARC cutoff wheels are more substantial and work far better. I have had a few similar cutoff wheels in the past but not in such quantity and none worked better. The second photo shows the result of a minute or less with a ?'' steel carriage bolt.
Comes with two connectors so that you can put the blades on them in case you need them. Goes on a standard Dremel type tool for cutting. And these are really good quality blades. I took the blades and checked them out and I cut a couple bolts in half with them. I didn't have any issues
This review is for the EZARC 1-1/2 Cut Off Wheels, 1.5'' x 1/8'' Fiberglass Reinforced Rotary Tool Cutting Disc Accessories Include Mandrels, 32-Pack
Comes with 2 mandrels fit most rotary tools with a 1/8'' arbor. With a 0.045'' (1.1mm) blade thickness, durable fiberglass construction, and a max speed of 45,000 RPM.
Cut-Off Wheels are reinforced with fiberglass for enhanced durability
Includes a sturdy PP storage case to keep all 30 discs neatly organized, securely protected, and easily portable for outdoor jobs and home DIY projects.
discs comply with international standards and safety requirements EN 12413, ASM07
I have a high-speed rotary tool with a collet that accepts 1/8-inch mandrels and can use this type of cut off wheel. It's great for tight areas where you can't get your 4 1/2 in grinder into.
These are good for cutting and do a good job of it. However, they are small and tend to wear down quickly. So, I ordered this 30 pack as it's good to have several on hand.
These small wheels will ware quickly and may break apart when near the end of their life cycle.
NOTE: Always wear approved safety glasses and gloves when grinding or cutting with abrasives!
This 32 piece pack of 2 1/2'' Cut-Off Wheels includes 2 Mandrels with 1/8'' smooth shanks.
These offer a very thin cut at a maximum speed of 45,000 RPM through a unique bond of fiberglass mesh, modified sand and resin.
Perfect for that Dremel tool used in cutting metal or other materials for the Professional and DIYer alike.
Excellent Quality, Hard to beat Value!
These little cutoff wheels work great. They're tough, but with a thin kerf, which is great for finer work. And, unlike the hobby-grade stuff, they can take some abuse without breaking. Also, I like that despite being so thin, just 1.25mm, they have a strong fiberglass mesh layer. So, when they do eventually break, they don't shatter into a thousand pieces, spreading shrapnel everywhere.
I have to admit I was very skeptical that these would be useful for my project. I’m on the second order and using them almost daily. They really work. I also use your 4 1/2” flap wheels and they are great. You guys rock.
Thanks
Cuchillas Oscilantes Multiherramienta
Hojas de sierra recíproca
Corte y Esmerilado
Sierra de corona
Perforación
Lijado y pulido
Juego de vasos y llaves de vaso
Herramientas Manuales
Trabajador de metal y fabricación
Carpintería
Electricidad y fontanería
Automotriz
Hormigón y Albañilería
Demolición
NUEVAS LLEGADAS
