Jamie s.
Been buying semi decent blades for years and then got these . Wouldn't buy any other blades again. It seems expensive but 1 blade has lasted longer than probably 4 blades from other brands
Robert K.
Only used one for normal work. Want to get into rough work to see how they last
ian r.
Good service and quality blades.
Marcel G.
Very good product i will recommed
Peter C.
I used them for the first tie a few days ago yes I was impressed they cut well and so far seem to last longer than some other brands I have used, so good so far
Toy Collector
These saw blades provide users with extra inches to work with, making their cuts more effective and consistent. They are ideal for long reaches and plunge cuts into tight spaces.They are made of titanium and are more wear-resistant than normal multi tool metal saw blades and seem to last twice as long as normal blades. They are compatible with most brands of oscillating tools on the market but not recommended for the starlock interface system.I found that the secret is to let the blade do the work and not use too much force or speed when operating your equipment. These blades are really effective and reasonably priced.
D.c. B.
The photo shows my most common use for oscillating tools - cutting in trim, in this case for a custom closet organizer. The EZARC blades fit my oscillating tools perfectly, including the Dewalt XR cordless shown. (As some other have reported, Dewalt fit can sometime be a problem, depending on blade brand.) The blade is held tightly, stable in use, and cuts cleanly.Significantly lower cost than many brands, and quality seems good.
J Staples
Longer lasting under stressed conditions, have reordered several times
Shane
use these to cut through nails in the wall. Cuts like a hot knife in butter
Justin
These are great blades for my multitool, and performed wonderfully when I needed to cut off some protruding nails in a furniture piece I was working on. I like that there are measurement lines as well, so when using the blade to reach between pieces, you can be consistent with the depth. Seems very sturdy so far - teeth did not get dull or jagged after cutting these nails, so I am pretty optimistic on the durability.
Surfnsink
tested cutting solid wood and a nail and they performed perfectly. definitely recommended
E.K.
Ordered these as the previous blades for my Ridgid oscillating saw were dull and these fit on it and they seem to be doing a great job cutting so far!
hongguang
Very good product
Saundra Wright
These fit my Dremel tool great. They seem a little pricey but also seem to be a heavy quality than other blades. I will update my review after we have used them more, they seem to do fairly well on metal unlike some cheaper blades.
Brittani M.
I originally got this to clean up some rough siding edges around a newly installed door, these worked great for that but are also suitable for any real quick cuts especially if they nee to be flush or are in an awkward spot.
Otto A.
product arrived on timeany one to worked as expected thank you would or will order more recamend any one to buy
funbear
We use these blades for cutting windows into to sheet metal on our post frame buildings and they are hands down the best we've used.. just finished a job cutting 60 linear ft of steel and only 2 missing teeth.. any other brand (including Milwaukee) we would have gone thru multiple blades.
Luke S
Great overall cutting blades at a fantastic price. Everyone with one of these tools has/needs something like these
Pam Austin
Can't wait to try these
Lars
Really like the packaging. Fits on my Dewalt oscillator and works like a charm. I was cutting some steel fence posts and cut through them like butter. Looking forward to seeing how long they last and will update the review if I see any issues.
Tyler Mast
I recently bought some name brand blades on sale and the EZ ARC blades lasted longer and still cost half of what the name brand blades did (on sale) . I frequent cut through brass plumbing parts, nails, and iron and these do a great job. The key is letting the blade do the work and don't run your tool with excessive pressure or speed.
Mark W Griffin
It works great for all nails
Chuck X
Love my Ezarc blades. Good quality.
Raymond bennett
These came well packaged to prevent breakage and to protect the blades. They fit my Ryobi One+ HP multitool very well and cut thru wood and metal fairly well. There are included 2 adapters for other brands of multitools which as of now I do not need. The blades are oiled slightly to prevent rust. Overall they are nice blades and I will buy them in the future when I need them.
Surfnsink
I recently bought some name brand blades on sale and the EZ ARC blades lasted longer and still cost half of what the name brand blades did (on sale) . I frequent cut through brass plumbing parts, nails, and iron and these do a great job. The key is letting the blade do the work and don't run your tool with excessive pressure or speed.
yans
Excellent quality, allowing you to easily cope with the challenges of cutting wood and metals. Throw away your bulky hand held hack saw or coping saw. These blades are long lasting and cut material like knife thru utter. I paired blades with off brand (HF) saw and the fit perfectly, no adapter needed. Makes for powerful and inexpensive saw. Just as good as name brand performance.Definitely use a, mask and try to use a shop vac if possible. Seemed pricey at first, but after a few uses I'd have to say they are worth it.
David
The blades fit my old Dremel Oscillating Multitool. Not my every day choice for a blade but these are perfect for some circumstances. The extra length makes these blades an excellent choice for cutting door casing for tile and cutting small nails off behind molding when the regular size blades are a bit short.The markings are impossible to read when the multitool is running so I used a strip of tape to mark the depth.The extra length makes fine control an issue. They are good quality and cut nails easily, the trick is to keep the blade on the nail.
Matt
Wow, impressed with the performance! Cut neil like butter, what a good value
Miguel
Love my Ezarc blades. Good quality.
Chuck X
My husband wanted these and he is pleased with them
Trevor & Amber
I had to splice 2x4 corner boards at a 45 degree angle while mounted to the wall still, outdoors. I cut a 45 on a 1/2 inch board screwed it as a template on the outside of the 2x4. Followed the 1/2 inch boards angle as my guide to splice the 2x4 these blades were long enough to do that. Absolutely handy. Cut right through the wood. Used them after to clean up nails. Worked great.
Stacey Laney
These are great blades for my multitool, and performed wonderfully when I needed to cut off some protruding nails in a furniture piece I was working on. I like that there are measurement lines as well, so when using the blade to reach between pieces, you can be consistent with the depth. Seems very sturdy so far - teeth did not get dull or jagged after cutting these nails, so I'm pretty optimistic on the durability.
Eugene Beck
I love my multitool... so useful for many situations I find myself in. These blades are top notch. If you bought them separately here in the US at any big box hardware store... you could easily play a LOT more. I'm pleased!
T. Fleming
The blades fit my old Dremel Oscillating Multitool. Not my every day choice for a blade but these are perfect for some circumstances. The extra length makes these blades an excellent choice for cutting door casing for tile and cutting small nails off behind molding when the regular size blades are a bit short.The markings are impossible to read when the multitool is running so I used a strip of tape to mark the depth.The extra length makes fine control an issue. They are good quality and cut nails easily, the trick is to keep the blade on the nail.
Wes
I had to splice 2x4 corner boards at a 45 degree angle while mounted to the wall still, outdoors. I cut a 45 on a 1/2"board screwed it as a template on the outside of the 2x4. Followed the 1/2" boards angle as my guide to splice the 2x4 these blades were long enough to do that. Absolutely handy. Cut right through the wood. Used them after to clean up nails. Worked great.
Noe Vasquez
I have a craftsman 20v osc saw and these blades fit and work great! They're wood/metal so they handle most cuts even if there's screws and nails. Overall durability is solid. I'm a DIYer so I'm by no means a professional carpenter or anything like. But for the projects I have around my home and in my shed, these blades are perfect
B. Wolf
Feeling that they should have lasted longer, but they performed well cutting the floor ends of two old radiator covers, vintage late 50's. These covers were pretty thick gauge sheet steel. One blade made it through the first 3, but started with a fresh one for the last end/corner. Overall, I was happy with their performance and they cut well when fresh.
Yiming Hu
The extended reach was exactly what I was looking for. I cut approx 50 nails with ease and the blade still looks great. These blades are a little pricey, but they have a great reach and may outlast my other metal cutting blades.