OSCILLATING MULTITOOLBLADES
RECIPROCATING SAW BLADES
HOLE SAW
DRILLING
CUTTING & GARINDING
SANDING & POLISHING
How does EZARC solve these Problem?
1.Advanced materials combined with precision manufacturing processes
Selection of materials with greater wear and heat resistance, such as high-speed steel, cemented carbide and other high-grade alloys.Advanced heat treatment processes are used to harden the blade and increase its toughness.Strict quality control measures are implemented during the production process to strictly monitor the pressure resistance and hardness of the blades.
2.Special blade tooth design and innovations
Blades with optimized tooth shapes are designed for specific cutting applications. Use specialized tooth profiles for different materials to reduce friction and heat generation during the cutting process.
In addition, vibration dampening is incorporated into the optimized tooth design to effectively reduce vibration and minimize wear and fatigue of the blade teeth.
3.Blades designed for different materials to enhance cutting life
Throw away the hundred-piece packs of "junk" blades you buy on Amazon for $50 that dull one by one in the minute it takes you to cut a bolt.EZARC's different material choices and tooth designs for different cutting materials help you achieve a super long cutting life with one blade and refuse to replace it too often.
4.Providing you with the best blade cutting solution to get the job done
We offer a selection of blades for different materials such as wood, wood with nails, metal, hard bolts, drywall general purpose materials, etc. The blade material and teeth are specifically designed for these materials, allowing the teeth to remain abrasion-resistant and sharp, making your oscillating multi tools more efficient.
5.two adapters for compatibility with more oscillating mlti tools
To solve the problem of adapting the blades to the machine, EZARC equips the blades with two adapters to fit a wider range of machines.EZARC oscillating multitool blades can fit all Dewalt Multi Tools include 20v cordless tool. Beside Dewalt, it can direct compatible with Makita, Milwaukee, Fein, Genesis, Ridgid, Craftsman, Rockwell, Black & Decker, Porter Cable, Worx, AEG, Ryobi, Bosch non-starlock.
Don't just believe what we say!
Let's take a look at the results of the professional evaluation!
Project Farm is renowned for its detailed testing and objective evaluation, without receiving sponsorship
Ran2：1st Nail Cut Time (seconds)
Milwaukee 1.6s.EZARC 3.6s,DeWalt 3.7s,Hercules 4.8,Fein5.2s
Ran1：Total Drywall Screws()
EZARC:5,Bauer:4,Imrerial:3,Fein:3,Bosch:2,Dremel:1,Rockwell:1,Dewalt:0,Milwaukee:0
Rank1：Condition of teeth after cutting nails/screws
EZARC：very good DeWalt：bad,Miwaukee：bad,Dremel：bad
In the video, PJ tested the time and durability of each blade cutting nails, including DeWalt, Milwaukee, Bosch, Rockwell, Dremel, EZARC, Imperial. You can see that EZARC blades stand out with fast cutting speed, highest durability, and highest cost-effectiveness.
Products in the video
1-3/8 in. Carbide Oscillating Blade For Hardened Metal/Bolts,OIC34A
Cutting experts for tough materials
Easily cuts through hard materials: nails, screws, bolts, rebar, etc.
Third-generation carbide technology unlocks potential for inserts
High-hardness carbide blades make the teeth more wear-resistant and heat-resistant, 30x longer life than bi-metal blades.
The best oscillating multi blade choice for Millions of users
The Youtube channel "Project Farm" with millions of followers has professionally tested the EZARC is the best oscillating tool blade.
WHAT THEY SAY ABOUT EZARC
Over 14K 5Star Reviews and Counting
Got these for Christmas 2 years ago. Just finally wore out my first blade and only because I didn't realize i was cutting cement board. I have been very pleased with their performance. I hope they still sell these in a few years when they finally all wear out.
Rob Bender
home user
Got these for Christmas 2 years ago. Just finally wore out my first blade and only because I didn't realize i was cutting cement board. I have been very pleased with their performance. I hope they still sell these in a few years when they finally all wear out.
Rob Bender
home user
Got these for Christmas 2 years ago. Just finally wore out my first blade and only because I didn't realize i was cutting cement board. I have been very pleased with their performance. I hope they still sell these in a few years when they finally all wear out.
Rob Bender
home user
Why do you choose a more expensive one when the quality is the SAME
—Our products come from top factories in the world and they also produce DIABLO, DEWALT, MIWAKKE
Made in USA
Imported raw materials from Milwaukee Tool, USA
Factory supplier of many brands
We supply to many world brands:Bosch,Miwaukee,Makita,DeWalt,,RYOBI,Rockwell,Black&Decker,RIDGID
Advanced industrial equipment
Our factories are equipped with state-of-the-art industrial equipment to control product quality.
Quality inspection report
AS SEEN IN
Home Deport
Menards
Walmart
wilpu
POWER TOOL ACCESSORIES SOLUTION SPECIALISTS
creating more value for your power tools
Newsletter
Enter your email for 10% off your first order.Receive updates, access to exclusive deals, and more.
