STEPHEN B.
Great cutting blade, I just wish it was available as a 12 inch long.
Woodley420
This blade cut through these high strength u-bolts with no problem. Took about 3 minutes to cut through 8 of these u-bolts that were too long on my suspension lift on my truck. I first tried a Dewalt metal cutting blade and it barely made a scratch in the bolt so I bought some of these and it cut through them like butter. Would highly recommend.
Nigarachi3742
I normally by Diablo blades,but thought I'd try these because they were cheaper.I'll continue buying Diablo brand they last longer
Brian
These cut some trailer bolts very well. About 3-4 cuts 1/2" bolts wore one out, but they did the job on some old rusted 1/2 bolts. WAY better than standard blades.
pike man
Very nice blade. I cut 10 pieces like that. This is really solid metal. WOW!!!
JRS
We liked that the blade was long as it gave us better angles for going through wood and nails. The cost was reasonable and we really sawed through many nails without a hitch!
Greg Klug
Very nice. Is a gift
steve clifton
I used this blade to cut 1/4inch stainless steel rod. The previous blade I used was dull after one cut and it took several minutes to get through it. I made three cuts with this blade in three minutes. It is still usable for additional work. Great product. Stainless is the most difficult material to cut and this blade had no trouble getting through it.
Paul A.
Was not sure how good they would be,used one yesterday and just ordered another 2 packs .very good product
Dylan pollachek
needed to take out a buried in the ground galvanized steel trough/tank that was cemented/concreted in many moons ago - no angle grinding disc or normal recip saw blades would cut through more than 1 foot before needing to change blade... these carbide blades are expensive but they did the job for me - thickest area was 4mm sheet with studs - cuts through like butter! Used up all 3 blades to take most of the tank - need to buy more now to take out the rest!
Frank Adams
Am a plumber for 20 years I owned a plumber company 3 trucks on the road. I must say I was removing some cast iron from underneath a house and putting in pvc. These blades cut the cast iron like I was cutting plastic I could not believe it. Battery saw is ok to use but the electric ones way better to use with these blades. I don't know these guys who make them I don't know the company I just saw it on Instagram and decided to try it. 100% worth it TRUST ME.
Donald G Kallgren
I'm always scared of buying cheaper parts, but these blades did just as good as the blades I had before that were 5 times the price of these. So I'll be buying them again when I need them.
Timothy Boone
These have been getting used pretty heavily and still on the first blade. longevity is definitely a big factor in the buying these so I'll definitely buy more, but it may take awhile before needing to.
Gary0529
It is really hard to accurately rate the sawblades in that I never know the hardness of what I'm cutting and its impact on the longevity of the blade but these work as good as what I can pick up at the local big box hardware stores at a much better price, and since I look at these as a consumable as long as they do their job for a reasonable period of time I guess I'm happy
L&S
Likes - Cuts metal really well. I cut into a steel pipe and had no problem. Did a couple of pipes and still cutting ok.Dislikes - A little pricey for just one blade in my opinion.
James Davidson
I WAS SATISFIED WITH THE PERFORMANCE
Michael
I was burning through blades like crazy cutting nails. Switched to these. Still on the same blade. Great for cutting hardened metal
pittsburgh guy
strong blades,well made
Ralph E Granados
Went through Harden steel very well, Play dineen look worn out at all 11/4 bolt
dukeanika
Was using this guy just today to cut the top off a 55 gallon drum. I had it in my 20v Porter Cable sawzall for what it's worth. I tell you what! This thing tore thru that steel drum like it was nothing! Ton of time and effort saved, and even after this, and all the other uses I've put this blade to, it still looks as good as new. Well, the blade part does, the paint on it has kinda burned away lol, but the business end of it is still as good as new =)
Ruffimusic
Just what I needed for the hard to reach cuts in my DIY project, cutting an anvil out of an 18 section of railroad. Rugged. Durable.
Dennis Unklesbay
Not worth the money
Herschel Stults
I purchased this as a replacement blade for my saw and I feel it is a great value. I was most impressed with the thickness of the carbide and I will definitely order this again.
Mike Rego
Quit after 2 cuts on angle iron.
Rachael Brewer
Best reciprocating saw blades ever. Will definitely purchase again.
M. B
I used this to cut through some exhaust pipe and some heavy iron pipe 2 and 1/2 in around and it cut like butter you got to get this
rufus dukes
Blade worked well. Used to take apart pallets, cut through thick nails with little effort. Have used on six pallets already and blade still working as if new. Would buy again
Julie welch
I found that the blade had a difficult time starting the cut. The teeth on the blade were bouncing off of the tubing and making starting the cut difficult. I should have went with finer teeth.Also once the blade started cutting, I found that the edge of the tubing would slip between the teeth on the blade and lock into place. I should have went with finer teethAnd finally, I used one blade once and three of the carbide tips broke off during use. I believe that the tips would brake off when the blade would lock up with the edge of the tubing between the teeth.
jacksonville
I use only one blade so far cut through heavy steel and even the shaft of a hydraulic cylinder and the blade is still good
Daniel B.
Cuts through everything!
Jorge A Call
This blade is one of the best and toughest I ever used and trust I had bunch of them (very expensive ones). This blade literally cut through hardened cast iron without hesitation!! Pretty dang awesome
Anthony Rowe
Cutting metal and wood projects
Les Porter
These blades hook into my saws no problem. Cut like butter and stay pretty sharp. I tested all blades and they all match the same quality and build. I've used one pretty heavily and It does show signs of wear and cuts slower but has outlasted my normal older non carbide blades.
Elizabeth Goodhue
The blade worked as advertised but I felt it was somewhat short-lived
bd service
Just didn't last, burnt 3 blades in 15 minutes.
Grant H Bittenbender
Whenever I look at the saws all blades I get tingly
Mastiff8
These blades do the job, they were used to cut a door into a cast iron pot, to make me a pizza oven, I differently will buy more, also we used them to cut fire brick, they worked great
Richard W.
These carbide blades worked very well for cutting through some rusty bolts that held on the upper control arms on my truck that I had to cut off. I would highly recommend them and I will be purchasing more of them.
Vickie
I bought these to remove the old Cast Iron waste pipes in my home and, does the job so far I cut thru three 4" pipes without a problem and should be usable for at least three more. I would recommend the product.
J. Metcalf
I use it to cut up a ford f150 transmission I could lift it on my truck to junk it. All other blades I used didn't last. I just needed one ezarc blade to do the job. I would definitely recommend them.
Jon
I used this blade to dismantle a chain link fence by cutting the galvanized fence post at the concrete that anchored the post. Cut the last as well as the first. No noticeable difference. Cut approximately 10 posts.
Peggers
Used it to cut through a solid stainless steel stock. I was impressed, so I bought more.
Joel M.
I purchased this hoping it would last longer than 2 days and no dice. I install solar and have been trying various blades Ave this is by far the worst. Stay away if you have any actual work to get done.
Pojiboy
Great blade long lasting
Charlie Woods
I cut twice through a piece of 3/8inch steel. Very impressed!
Ron Ward
Horrible for the price
DANIEL W ANDERSON
I think I just found my new favorite blades. These are crazy tough and outperformed the king of the hill "Big D" blades I've been using. Sliced through four M16,10.8 grade bolts with a single blade. A pack of 3 for roughly $24, can't beat that.
SJFAN989
Bought for rebar. Cut like cutting wood ie fast and easy. Much cheaper than individual blades locally
pattyflyingbear
really good metal cutter
Mustanger
Cut through steel, 40 inches of 5/32 weld with one blade and is still sharp ready for more work. Surprising that it cuts with such large pitch. Did break off one carbide tip, but still finished the job. Would buy again.
Linda DiBi
My husband loves using this product, they're strong and outlasts other blades and they really get the job done. Would definitely recommend this product.
drew
Less expensive than the original name brand blade.
Tiffany Bekowitz
Cut better then expected !
walla2k5
cuts hardened steel that other blades will not
Travis G Pickle
Went through 4 brand new Milwaukee blades (made for heavy steel) over about 20 minutes trying to cut one of the lower control arm bolts off my truck and all they did was dull out. Used one of these blades and quickly cut through 4 bolts in about 3 minutes and it's still good as new. I don't normally leave reviews but these are awesome.
Asay O.
Used to cut 6 mm steel bars. The fusion of the blade is better than Makita and Hitachi's blade. So order again.
Engineer 8.
Summary: When I have a need to cut thick metal, I like having multiple options, which are a carbide tipped reciprocating saw, or a cut-off wheel on a grinder.Observations: My reciprocating saw is a Milwaukee M18 Fuel (full size), and my grinder of choice is 5-inch M18 Fuel.Recommendations: Between the two options, I find I can get cleaner cuts with the saw. But for harder materials, especially stainless steel, I prefer the cut-off wheels, especially in a demolition/removal application. For thin material, I prefer the grinder as the saw blade some times grabs the teeth, especially when the material is thin enough to fit between the blade teeth.Pros: Good fit & finish.Cons: None.Conclusion: At $23 for a 3-pack, about $8/each, rating these 5-stars, as they are priced comparable to similar offerings. A little less than the Diablo blade below, which is one of the most highly rated reciprocating blades.Related Products:Diablo DS0608CF 6" Carbide Tipped Reciprocating Saw Blade - 1/each
Ed E.
Waiting for a chance to put these to use
jason d.
I cut through more than 2 feet of 3/8” hot rolled steel with this blade and there was still some life in it.
Ruitto J.
Went through 4 brand new Milwaukee blades (made for heavy steel) over about 20 minutes trying to cut one of the lower control arm bolts off my truck and all they did was dull out. Used one of these blades and quickly cut through 4 bolts in about 3 minutes and it’s still good as new. I don’t normally leave reviews but these are awesome.
David h.
We are an automotive repair shop& do a lot of exhaust work. Ordered these blades & they are outstanding. Last 3 times as long as ones I get at local parts stores
AvidBuyer
Chewed through old cast iron pipes from a home steam heat system. Made a total of 8 cuts. Some loss of bite but easily could have made another 3 or 4 cuts before switching blade.
Julie welch
These blades do the job, they were used to cut a door into a cast iron pot, to make me a pizza oven, I differently will buy more, also we used them to cut fire brick, they worked great
JMaC
I bought these to remove the old Cast Iron waste pipes in my home and, does the job so far I cut thru three 4" pipes without a problem and should be usable for at least three more. I would recommend the product.