1-1/2 Trennscheibe aus faserverstärktem Glas für gehärteten Stahl, Aluminium, Kunststoff
Wenn Sie einen Dremel oder ein beliebiges Rotationswerkzeug besitzen, brauchen Sie dieses Kit – Punkt. Diese 30 glasfaserverstärkten Trennscheiben halten viel länger als die mit Ihrem Werkzeug gelieferten Scheibenund schneiden durch Stahl, Schrauben und Aluminium, ohne zu reißen. Im Lieferumfang enthalten sind 2 solide Dornefür glattere, sicherere Schnitte, alles verpackt in einem stabilen Koffer, damit Sie für jede Aufgabe bereit sind – sei es eine rostige Schraube, Blech oder Ihr nächstes Projekt.
EZARC betreibt über 20 Lager weltweit, und Ihre Bestellung wird vom nächstgelegenen Lager versandt.
Aufgrund der Verfügbarkeit des Lagerbestands können einige Bestellungen von einem anderen Lager als ursprünglich geplant ausgeführt werden. In solchen Fällen können die Lieferzeiten das geschätzte Lieferfenster überschreiten.
Seien Sie versichert, wir legen Wert auf die schnellstmögliche Abwicklung und halten Sie während des gesamten Prozesses auf dem Laufenden.
Garantie
Innerhalb von 30 Tagen nach Lieferung des Produkts bieten wir eine Rückerstattung oder einen Produktersatz an, wenn Sie eines der folgenden Probleme feststellen:
Produkt beschädigt angekommen
Falsches Produkt erhalten
Qualitätsprobleme während der Nutzung
Kontaktieren Sie uns unter support@ezarctools.com
Wir melden uns innerhalb von 3 Werktagen bei Ihnen.
bitte lesen Sie unsere vollständigen FAQs hier. Wenn Sie noch Fragen haben, kontaktieren Sie uns bitte hier :)
Beschreibung
Hervorragende Haltbarkeit
EZARC Trennscheiben sind mit Glasfaser verstärkt, um eine verbesserte Haltbarkeit zu gewährleisten, wodurch sie ideal zum Schneiden, Trimmen und Nuten einer Vielzahl von Materialien sind, einschließlich gehärtetem Stahl, Bolzen, Schrauben, Blech, dünnem Holz, Aluminium und Kunststoff.
Präzises Schneiden
Diese 1,5-Zoll-Trennscheibe liefert mit ihrem ultradünnen Design saubere, gratfreie Schnitte und gewährleistet eine reibungslose, präzise Leistung zum mühelosen Schneiden harter Metalle.
Spezifikationen
Wird mit 2 Dorne geliefert, die zu den meisten Rotationswerkzeugen mit einer 1/8-Zoll-Aufnahme passen. Mit einer Klingenstärke von 0,045 Zoll (1,1 mm), einer robusten Glasfaserkonstruktion und einer Höchstgeschwindigkeit von 45.000 U/min.
Bequeme Aufbewahrung
Enthält einen stabilen PP-Aufbewahrungskoffer, um alle 30 Scheiben ordentlich organisiert, sicher geschützt und leicht transportierbar für Außeneinsätze und Heimwerkerprojekte zu halten.
Erhöhte Sicherheit
EZARC 1-1/2 Rotationswerkzeug-Trennscheiben entsprechen internationalen Standards und Sicherheitsanforderungen wie EN 12413, ASM07. Bitte tragen Sie während der Verwendung der 1,5-Zoll-Trennscheiben geeignete Schutzausrüstung und überschreiten Sie nicht die angegebene Höchstgeschwindigkeit.
Try it today—if it’s not right, return it free within 30 days.
Free Shipping Over $25
Economical Flat Rate Shipping for orders under $25 worldwide.
Warranty up to 24 Months
We’ve got you covered—enjoy peace of mind for up to 24 months
Trusted by pros Who Know Best
Reliable quality is our attitude towards consumers
@Project Farm
EZARC is your best choice when considering cutting speed and cost performance, maybe there is no better one than it. I recommend it to everyone.
@Mechanically
I'm a contractor and I have tried about every blade out there and these seem to be top shelf. Im not gonna say they are the best but i will definitely be purchasing more.
@medomechanic
Oh, let me tell you about the incredible Diamond Cutting Wheel! This tool defies all expectations and cuts through metal like a hot knife through butter, that’s simply out of this world!
@soyflaco0
This countersink set is a must have in your tool box. It is important if you're a stickler for finishing jobs and want everything to look amazing and beautiful. It is very durable and will last after job.
@brc_framers
This disk is immortal. I've cut so many things its hard to understand how the disk even exists anymore, let alone still cuts things... I will encourage others to buy them.
4.8/ 5.0
Dieses Produkt wurde mit 4.8 von 5.0 Sternen bewertet. Es hat 131 Bewertungen erhalten.
Customer Reviews
Overall rating: 4.8 / 5 from 131 reviews.
I am a metal sculptor and use Dremel cutting discs for fine sculpting. Don't get me wrong, they work well but are quite expensive and I can go through them rather quickly. As you can see from the pictures, I started with a piece of rusty metal rod and turned it into arms with hands and fingers. I decided to try these cutting discs and am very impressed with how they work. Even better, they came with 2 mandrels which fit into my Dremel. I also love the container which has impressions to hold the discs and mandrels so they stay in one place.
I should not have needed to complain to get the kit as advertised.
There were no mandrels in the box.
This was rectified - but getting it right first time would be the thing.
Worked great. I started a job and was only able to get about 2/3 before 3 other name brand cut-off wheels were completely ate up. Ordered EZARC just to get the job done. Finished using only 1 EZARC Cut-Off Wheel! And it barely looks used; as you can see in the pic.
I use my Dremel tool a lot and I like to have as many cutting bits and other accessories as possible so that I am ready for whatever job comes up without having to run to the hardware store. I like to have plenty of the consumable accessories like sanding drums and cut off wheels so that I don't run out. These are larger and a little bit thicker than the wheels that I use the most, but for bigger jobs they are better because they don't wear as fast and are not as prone to breaking as the smaller, thinner cut off wheels. These cut very well and are fiberglass reinforced so they are not as likely to break. The set came with two mandrels and work perfectly with my Dremel tool. I am happy to have found them and can recommend them.
I have used Dremel and Foredom motor tools for almost 50 years, often for cutting something with the very thin cutoff wheels that Dremel (and others) offer. You can see a comparison in one of the photos. It often takes me two or three of those wheels just to shorten a bolt. These EZARC cutoff wheels are more substantial and work far better. I have had a few similar cutoff wheels in the past but not in such quantity and none worked better. The second photo shows the result of a minute or less with a ?'' steel carriage bolt.
Comes with two connectors so that you can put the blades on them in case you need them. Goes on a standard Dremel type tool for cutting. And these are really good quality blades. I took the blades and checked them out and I cut a couple bolts in half with them. I didn't have any issues
This review is for the EZARC 1-1/2 Cut Off Wheels, 1.5'' x 1/8'' Fiberglass Reinforced Rotary Tool Cutting Disc Accessories Include Mandrels, 32-Pack
Comes with 2 mandrels fit most rotary tools with a 1/8'' arbor. With a 0.045'' (1.1mm) blade thickness, durable fiberglass construction, and a max speed of 45,000 RPM.
Cut-Off Wheels are reinforced with fiberglass for enhanced durability
Includes a sturdy PP storage case to keep all 30 discs neatly organized, securely protected, and easily portable for outdoor jobs and home DIY projects.
discs comply with international standards and safety requirements EN 12413, ASM07
I have a high-speed rotary tool with a collet that accepts 1/8-inch mandrels and can use this type of cut off wheel. It's great for tight areas where you can't get your 4 1/2 in grinder into.
These are good for cutting and do a good job of it. However, they are small and tend to wear down quickly. So, I ordered this 30 pack as it's good to have several on hand.
These small wheels will ware quickly and may break apart when near the end of their life cycle.
NOTE: Always wear approved safety glasses and gloves when grinding or cutting with abrasives!
This 32 piece pack of 2 1/2'' Cut-Off Wheels includes 2 Mandrels with 1/8'' smooth shanks.
These offer a very thin cut at a maximum speed of 45,000 RPM through a unique bond of fiberglass mesh, modified sand and resin.
Perfect for that Dremel tool used in cutting metal or other materials for the Professional and DIYer alike.
Excellent Quality, Hard to beat Value!
These little cutoff wheels work great. They're tough, but with a thin kerf, which is great for finer work. And, unlike the hobby-grade stuff, they can take some abuse without breaking. Also, I like that despite being so thin, just 1.25mm, they have a strong fiberglass mesh layer. So, when they do eventually break, they don't shatter into a thousand pieces, spreading shrapnel everywhere.
I have to admit I was very skeptical that these would be useful for my project. I’m on the second order and using them almost daily. They really work. I also use your 4 1/2” flap wheels and they are great. You guys rock.
Thanks
Oszillierende Multifunktionswerkzeug-Sägeblätter
Säbelsägeblätter
Schneiden & Schleifen
Lochsäge
Bohren
Schleifen & Polieren
Steckschlüssel- und Knarrensatz
Handwerkzeuge
Metallbauer & Fertigung
Holzbearbeitung & Zimmerei
Elektro- & Sanitärinstallationen
Automobil
Beton & Mauerwerk
Abriss
NEUHEITEN
